Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Logo

 

iso ul New UL UniFlow Fume Hoods
Laboratory Countertops Sinks and Plumbing
A complete line of worksurfaces and cabinets to suit any application from economical light duty to heavy acid and solvent use. Select the worksurfaces and cabinets that meet your laboratory’s requirements. Standard sizes are listed below. HEMCO’s technical staff can make recommendations to suit your specific needs.
(UniFlow SE, LE only) Epoxy Resin, color: black, 1-1/4” thick, 3/8” dished
Epoxy Resin Worksurface

Epoxy Resin Worksurfaces are recommended for general laboratory work where greater chemical resistance is required. Surface is dished 3/8" to contain spillage. Worksurface is cast of thermosetting epoxy resin, creating a molded solid 1-1/4" thick top which is extremely hard, abrasion and heat resistant.

Size Cat. No. Size Cat. No.
36”W x 30”D 20315 36”W x 36”D 20325
48”W x 30”D 20415 48”W x 36”D 20425
60”W x 30”D 20515 60”W x 36”D 20525
72”W x 30”D 20615 72”W x 36”D 20625
96”W x 30”D 20815 96”W x 36”D 20825
(UniFlow SE, LE) Phenolic Resin, color: black, 1-1/4" thick, dished 1/4"
Worksurfaces CE

Phenolic Resin Worksurface are recommended for general laboratory work where high concentrations of solvent, acids and alkalies are being worked with. Work surface combines excellent chemical resistance scratch and wear resistance. Surface is flat 1-1/4" thick,
dished 1/4".

Size Cat. No. Size Cat. No.
36"W x 30"D 21428 36"W x 36"D 22428
48"W x 30"D 21418 48"W x 36"D 22418
60"W x 30"D 21518 60"W x 36"D 22518
72"W x 30"D 21618 72"W x 36"D 22618
96"W x 30"D 21818 96"W x 36"D 22818
 
(UniFlow SE, LE only) Stainless Steel, satin finish, 1-1/4” edge, 3/8” dished
Stainless Steel Worksurface

Stainless Steel Fume Hood Worksurfacesare fabricated of type 304,16 gauge steel with #3 satin finish. Surface is dished 3/8" to contain spillage. All corners, ends, and joints are continuous 1-1/4" heliarc welded and ground smooth. Type 316 stainless steel is available.

Size Cat. No. Size Cat. No.
36”W x 30”D 20316 36”W x 36”D 20326
48”W x 30”D 20416 48”W x 36”D 20426
60”W x 30”D 20516 60”W x 36”D 20526
72”W x 30”D 20616 72”W x 36”D 20626
96”W x 30”D 20816 96”W x 36”D 20826
Laboratory Sinks & Plumbing

A complete line of sinks in epoxy resin, polypropylene, and stainless steel. We also offer a wide variety of plumbing accessories including
neutralization tanks and steam baths. HEMCO welcomes the opportunity to quote your special applications. Additional sink sizes are available.
Contact factory for more details. Conforms to ANSI Z21.15.

Fume Hood Laboratory Sinks
Epoxy Resin Sink Polypropylene sink Stainless Sink

Epoxy Resin Sink Laboratory sink made of chemical and corrosion resistant epoxy resin. Drop-in sink. color: black. Please specify desired location. Includes sink stopper & drain outlet.

Polypropylene Sink Laboratory sink made of chemical and corrosion resistant epoxy resin. Drop-in sink. color: black. Please specify desired location. Includes sink stopper & drain outlet.

Stainless Steel Sink Laboratory sink made of one-piece, type 304 stainless steel & polished to a No. 4 satin finish. Drop-in sink. Underside sound deadened to reduce drumming. Includes drain outlet.

 

Size

Cat. No.

1

9” x 6” x 6” deep

42021

2

16” x 12” x 8” deep

42022

3

18” x 15” x 11” deep

42026

4

24” x 16” x 8” deep

42027

 

Size

Cat. No.

1

12” x 8” x 8” deep

72041

2

14” x 10” x 6” deep

72043

3

18” x 15” x 12” deep

72045

4

28” x 20” x 9” deep

72048

 

Size

Cat. No.

1

12” x 12” x 7.5” deep

42031

2

16” x 16” x 7.5” deep

42032

3

16” x 22” x 7.5” deep

42033

4

16” x 28” x 7.5” deep

42034

Fume Hood Cupsinks
Cupsink   Cup Sink   Cup Sink   Cup Sink

Cupsink 6” Diameter
Polypropylene cupsink with 1-1/2” IPS tailpiece and outlet strainer.
Cat. No. 40118

 

Oval Cupsink
Drop-in oval cupsink in polypropylene. 1-1/2” IPS tailpiece includes strainer.
3” x 6” 40119
3” x 9” 40121

 

Oval Wall Cupsink 6” x 3”
Cupsink is made of polypropylene
with 1-1/2” IPS tailpiece and outlet strainer. Optional on FM fume hoods
Cat. No. 40419

 

Round Cupsink 9” Diameter
Cupsink is made of epoxy with 1-1/2” IPS tailpiece and outlet strainer.
Cat. No. 40519

Pegboard, P-Traps & Fume Hood Neutralization Tanks
Jar P Trap P Trap

Jar P-Trap
P-trap includes adjustable tailpiece and removable jar. 1-1/2” IPS tail piece.
Cat. No. 40220

P-Trap
P-trap is made of polypropylene
with 1-1/2” IPS tailpiece.
Cat. No. 40120

Pegboard

Phenolic Resin Pegboards

For drying and storage of lab ware. Pegboard in 1” thick and includes a stainless steel drip trough to collect run-off.

Width

Height

No. of Pegs

Cat. No.

24”

30”

39

72430

30”

30”

46

73030

30”

36”

60

73036

Neutralization Tanks Molded of one-piece,chemical resistant polyolefin, neutralization
tanks are designed to dilute and neutralize laboratory waste and concentrated
corrosives. Limestone is utilized as the medium for neutralizing the hazardous waste.
Note: limestone is not included with tank.

Neutralization Tank Neutralization tank Limestone

 

Description

Cat. No.

1

5 gallon tank (5.5” wide x 14” deep x 20” high with 1-1/2” IPS inlet/outlet) Note: 5 gallon tank requires (1) bag of limestone.

40222

2

15 gallon tank (17.25” dia. x 15.5” H with 1-1/2” IPS inlet/outlet) Note: 15 gallon tank requires (3) bags of limestone.

40322

3

Limestone is utilized as the medium for neutralizing the hazardous waste. (50 lb bag) Note: Limestone is not included with tank.

40223

     
  HEMCO Corporation 711 S. Powell Road Independence, MO 64056 816-796-2900 800-779-4362
    Copyright © 2010 HEMCO Corporation All Rights Reserved