Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Logo

 

iso ul New UL UniFlow Fume Hoods

SE Laboratory Fume Hoods

Designed for high efficiency, energy savings & maximum user protection. Available in 48", 60", 72" and 96" width; 32" depth X 59" height. The aerodynamic face opening with airfoil provides uniform air flow into the fume chamber. A constant volume low flow hood with VaraFlow baffle system efficiently directs the air flow through the fume chamber to the exhaust outlet with minimum turbulence.
SE Fume Hood
UniFlow Superstructure non-metallic construction for total chemical resistance (NO RUST), superior durability and long life. Integral one piece composite liner, glass smooth, all coved corners for ease of cleaning. Unitized construction reduces weight for ease of installation. 5 year warranty. Meets U.L.1805, and NFPA-45 classification with flame spread of less than 25 per ASTM E-84.
 
High Efficiency sash management provides for energy savings. With sash stops at 1/2 open air flow is reduced by 50%.
 
User Protection with sash in lowered position, fumes are kept safely away from the user.
 
29” Sash Height vertical moving sash for loading & unloading of fume hood.
 
Full 36" Viewing Height for ease of access and unobstructed view of fume chamber and working with tall apparatus & distillation grids.
 
Angled Picture Frame Opening aerodynamic face opening with air foil provides uniform air flow into the fume chamber, & thru the VaraFlow baffle system, to the exhaust collar.
 
Energy Efficient fluorescent vapor proof light fixture with polished stainless steel reflectors, and light switch on left column, all factory installed.
 
Air Flow Monitor continuously monitors face velocity air flow, comes standard with analog, digital available. Meets ANSI and
OSHA requirements. Optional equipment, Cat. No. 51406
 
Sash Stop located at 1/2 open to reduce air volume 50%, standard equipment.

UniFlow SE Hood Cat. No. 45511, shown with optional epoxy resin worksurface, base cabinets & fixtures

FUME HOOD ACCESSORIES

Fume Hood Worksurfaces

A complete line of worksurfaces, available in Epoxy Resin, Phenolic Resin, and Stainless steel.

Fume Hood Cabinets Constructed of 18 gauge furniture grade steel,powder coated color silver gray. Base cabinets have a load capacity of 500 pounds per linear foot.
Tested to be SEFA 8 Compliant.

Varaflow Baffle System
UniFlow SE Fume Hood Specifications Click for SE Electronic Plan-A-Hood
SE Fume Hood

UniFlow SE Specifications & Ordering Info

48" 60" 72" 96"

1. UniFlow ByPass Fume Hood with Vapor Proof Light: Superstructure to be unitized corrosion and fire resistant, non-metallic composite fiberglass construction, one piece fume chamber liner to have white glass smooth molded-in finish and all coved corners. Varaflow baffle system and bell shaped exhaust collar. Picture frame sash opening with vertical raising counter balanced clear tempered safety glass sash with chemical resistant PVC framing, track and aerodynamic sash lift. Vapor proof fluorescent light fixture and control switch are wired to a single point junction box. 115V/60Hz, AC All electrical components are U.L. listed. Optional electrical services. Fume hood is U.L.1805 classified. Fume hood is U.L.1805 classified. Specify CAV or VAV.

45411 45511 45611 45811

2. UniFlow ByPass Fume Hood with Vapor Proof Light & Built in Exhaust Blower Same: as #1 above except equipped with built-in corrosion resistant, vertical discharge, direct drive exhaust motor /blower, 115 volt, 60Hz, AC with control switches prewired to single point junction box. All electrical components UL compliant. Maximum duct run of 20'.

45412 45512 45612 --
3. UniFlow ByPass Fume Hood with Explosion Proof Light: Same as #1 above except equipped with explosion-proof, incandescent light fixture,Class I Div II Group A B C D Class II Div II Group F& G, 115 volt, 60Hz AC, UL Listed. Installed but not wired, must be wired to comply with local codes. Specify CAV or VAV. 45413 45513 45613 45813

4. UniFlow ByPass Fume Hood with Explosion Proof Light & Built in Exhaust Same: as #3 above except equipped with built-in corrosion resistant, non sparking, explosion-proof motor/blower exhaust system, Class I, Group C & D, Class II, Group E F & G, 115, volt 60Hz, AC. Explosion-proof exhaust blower and light are installed but not wired, must be wired to comply with local codes. Maximum duct run of 20'. Available in CAV.

45414 45514 45614 --
Click for SE Printable Plan-A-Hood form Click to Contact HEMCO Corporation
Click for SE Electronic Plan-A-Hood Note: Interactive Plan-A-Hood is not compatible with certain browsers or some email systems, If you have questions please use the printed Plan-A-Hood link or contact your sales representative.
Click for Sales, Service, & Request for Quote Click for Fume Hood Base Cabinets BTT
     
  HEMCO Corporation 711 S. Powell Road Independence, MO 64056 816-796-2900 800-779-4362
    Copyright © 2010 HEMCO Corporation All Rights Reserved